OM006-12 Model 116 Operating Manual Page 1
1 Introduction
Thank you for purchasing an Amplivox audiometer. The Amplivox Model
116 is a manual screening audiometer that will give many years of reliable
service if treated with care.
1.1 Intended applications
The Model 116 screening audiometer is designed for use by general
practitioners, occupational health staff and child health professionals and
is the ideal instrument for primary care groups, schools and industry. The
audiometer is not intended for use by hearing specialists to determine the
full extent and scope of a patient’s hearing deficiency.
The instrument is completely portable, and if required may be specified to
operate from integral internal batteries (see Section 2.3 below). Test
results may be printed using the specified printer option or transferred to a
PC running the Amplivox Audibase or AudiView applications.
1.2 Unpacking
Open the shipping carton and carefully remove all the equipment. Check
against the delivery note that all the accessories ordered have been
included with your audiometer. If anything is missing, please contact
Amplivox Customer Support (+44 1865 880846; sales@amplivox.ltd.uk). If
you have purchased from a distributor you should contact them directly.
Please retain the shipping carton and packing materials as the audiometer
will need calibrating on an annual basis and should be returned to
Amplivox in its original shipping carton.
1.3 Firmware version
This operating manual is for firmware versions 4v47 onwards. To check
the version of firmware on your audiometer press and hold the MENU
button followed by the TALKOVER button.
1.4 Standard contents
Model 116 Audiometer Audiometric headset
Carrying case Patient response switch
Mains adapter Audiogram cards
Operating manual & AudiView Calibration certificate
To Next Page
Loading...
