EasyManua.ls Logo

Ampro CoreModule 420 - Page 56

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 BIOS Setup
50 Reference Manual CoreModule 420
Keyboard and Mouse
Numlock – [Disabled] or [Enabled]
Typematic – [Disabled] or [Enabled]
Delay – [250ms], [500ms], [750ms], or [1000ms]
This feature is used for the keyboard and determines the typing delay.
Rate – [30cps], [24cps], [20cps], [15cps], [12cps], [10cps], [8cps], or [6cps]
This feature is used for the keyboard and determines the typing rate.
Initialize PS/2 Mouse – [Disabled] or [Enabled]
User Interface
Show ‘Hit <Del>’ – [Disabled] or [Enabled]
This feature, if Enabled, will place ‘Hit <Del>’ on screen during the boot process, to
indicate when you may select <Del> to enter the BIOS Setup menus.
F1 Error Wait – [Disabled] or [Enabled]
This feature, if Enabled, will display an Error message indicating when an error has occurred
and wait for you to respond by hitting the F1 key.
Config Box – [Disabled] or [Enabled]
This feature, if Enabled, displays the Configuration Summary Box, which list all of the
configuration information for the system, at the completion of POST, but before the Operating
System is loaded.
Splash Screen – [Disabled] or [Enabled]
This feature enables the Splash Screen and displays a default or customized splash screen.
Refer to the Splash Screen Customization topic later in this chapter for instructions on how to
customize the splash screen.
Memory
Memory Test – [Fast], [Standard], or [Exhaustive]
Memory Hole – [Disabled], [1MB], [2MB], [4MB] or [8MB]
Flash Address – [Disabled], [8MB], [9MB], [10MB], [11MB], [12MB], [13MB], [14MB] or
[15MB]
Shadow C800-CBFF – [Disabled] or [Enabled]
Shadow CC00-CFFF – [Disabled] or [Enabled]
Shadow D000-D3FF – [Disabled] or [Enabled]
Shadow D400-D7FF – [Disabled] or [Enabled]
Shadow D800-DBFF – [Disabled] or [Enabled]
Shadow DC00-DFFF – [Disabled] or [Enabled]
Power Management
APM [Disabled] or [Enabled]
Advanced features
Post Memory Manager – [Disabled] or [Enabled]
Watchdog Timeout (sec) – [select whole number between 1 and 255 seconds,
in 1 second increments] or [Disabled]

Table of Contents

Other manuals for Ampro CoreModule 420