Need help?Do you have a question about the Amsco RELIANCE 444 HTM and is the answer not in the manual?
General| Chamber Dimensions | 14" x 14" x 30" |
|---|---|
| Chamber Volume | 7.9 cu. ft. |
| Overall Dimensions | 28" x 30" x 48" |
| Exterior Dimensions | 28" x 30" x 48" |
| Interior Dimensions | 14" x 14" x 30" |
| Operating Temperature Range | 250°F to 275°F (121°C to 135°C) |
| Sterilization Temperature Range | 250°F to 275°F (121°C to 135°C) |
Instructions for opening the shipping crate and checking for damage.
Procedures for safely moving the unit and detaching it from the skid.
Steps to ready the unit after uncrating, including panel removal.
Steps for manually opening and closing the chamber door without power.
Details on voltage, amperage, power consumption, and operational parameters.
Guidelines for optimal operating environment, including altitude, temperature, and humidity.
Information on the sound pressure level emitted by the equipment.
Necessary clearances, utility connections, and electrical requirements for installation.
Detailed steps for connecting electrical, water, steam, air, and vent lines.
Final cleaning procedures after installation is complete.
Step-by-step guide for performing initial operational tests on the unit.
Configuration guide for setting dip switches on the control PC board.
Instructions for setting up and using the independent monitor system.
To Next Page