Need help?Do you have a question about the Amsco Evolution Series and is the answer not in the manual?
General| Brand | Amsco |
|---|---|
| Model | Evolution Series |
| Category | Laboratory Equipment |
| Language | English |
A list of items to verify after installing the sterilizer.
Procedures for verifying sterilization using biological indicators.
Measures integrity of sealed pressure vessel for air leaks.
Procedures for sterilizing liquids using the appropriate cycle.
Important guidelines for safely sterilizing liquids.
Identification and function of key sterilizer controls and valves.
Explanation of how alarm displays indicate abnormal conditions.
Description of control panels on single and double door units.
How to start or abort cycles using touch screen pads.
Pre-operation checks and warm-up procedures for the sterilizer.
Guidelines for cleaning and preparing items for sterilization.
Recommendations for arranging loads inside the sterilizer chamber.
Description of the prevacuum cycle and its validated settings.
How to adjust cycle parameters within a limited range.
Procedure for modifying sterilizer cycle parameters.
Screens for adjusting the sterilizer's time and date settings.
Options for changing general sterilizer operating settings.
Procedures and advisories for maintaining the equipment.
Daily checks and cleaning tasks for the sterilizer.
Recommended weekly maintenance tasks.
Alarm screens appearing during active sterilization cycles.
Alarm screens appearing when the sterilizer is not processing a cycle.
Alarms triggered by sensor readings anytime the sterilizer is energized.
Alarms related to water conservation system options.
Steps for replacing the bacterial air filter cartridge.
Procedure for cleaning steam strainers to maintain performance.
Steps for replacing the door seal on specific sterilizer models.
To Next Page