Amsco Evolution Series - Prevacuum Sterilizer Cycle

6-13
Sterilizer Operation Operator Manual 129390199
6.8 Prevacuum
Sterilizer Cycle
AMSCO Evolution Series Steam Sterilizers are shipped with factory-
set cycle values. The cycle sequence for these cycles are given in
S
ECTION 6.9, PREVAC CYCLES, on PAGE 6-15. Refer to Table 6-8 for
factory set, qualified cycle settings.
The sterilization cycles listed in Table 6-8 have been validated using
techniques documented in AAMI ST-8. If different cycle parameters
(sterilize time and dry time only) other than those in Table 6-8 are
required, it is the responsibility of the healthcare facility to consult
and follow the device manufacturer’s written instructions.
NOTE: Contact STERIS for information on a wide range of
education/training programs designed to meet the educational needs
of healthcare facilities.