Amsco Evolution Series User Manual

7-27
Cycle and Control Value Programming Operator Manual 129390199
7.5.7 Machine Number This is used to enter an identifying, two-character code into the
sterilizer control. This code can be any two-digit number between 00
and 99. The Machine Number code is printed out in the header for
each cycle printout, allowing for processed goods to be traced back
to a specific sterilizer when needed.
1. To access this feature, press the Options button at Cycles
screen, and at Options screen press Machine Setup. The
display advances to Machine Setup screen.
2. Press Machine Number touch pad; the display advances to
machine number set up screen.

Amsco Evolution Series Specifications

General

Brand	Amsco
Model	Evolution Series
Category	Laboratory Equipment
Language	English