7-34
129390199 Operator Manual Cycle and Control Value Programming
3. At Units screen, press the appropriate button for the type of unit
or units to be selected.
• Press Temp Units button to toggle between Fahrenheit (°F)
and Celsius (°C).
• Press Pressure Units button to toggle between PSIG and
bar.
NOTE: Machine does not require recalibration after selecting
units for display and print.
4. Once all units have been selected, press Exit to return to
machine setup screen.
7.5.11 Leaving Machine
Setup
1. Press Exit at Machine Setup screen to return to Options screen.
2. Press Exit at Options screen to return to Cycles screen.
To Next Page
Loading...
