Amsco Evolution Series - Units

7-33
Cycle and Control Value Programming Operator Manual 129390199
7.5.10 Units This feature is used to select or change the units the sterilizer uses
when displaying and printing chamber temperature and pressure.
This function allows selection of either Fahrenheit or Celsius units for
displaying and printing temperature. Pressure units can be changed
between psig/inHg or bar.
NOTE: Although Amsco Evolution Series Steam Sterilizers are
factory-set to operate using Fahrenheit temperature units, the
sterilizer can be reprogrammed to display and print using Celsius
temperature units.
1. To access this feature, press the Options button at the Cycles
screen; at Options screen press Machine Setup.
2. At Cycles screen, press Units button; the display advances to
Units screen.