Amsco Evolution Series - Operating System Alarms; Invalid os Revision

9-27
Troubleshooting Operator Manual 129390199
9.6 Operating System
Alarms
The following alarm screens appear anytime the sterilizer is
energized. Operating system errors, though rare, can occur either in
or out of cycle.
Condition Alarm Screen on Sterilizer Control Service Information
9.6.1 Invalid OS
Revision
Occurs if Operating
System Revision in
control is not equal to 5.1
Alarm Screen
Alarm Detail
Operating System Revision in
control is not equal to 5.1
Causes and Corrections:
1. Contact Service Engineering
2. Replace the sterilizer control.