Amsco Evolution Series - Printer; Figure 5-12. Thermal Printer; Figure 5-13. Accessing Duplicate Print

5-9
Component Identification Operator Manual 129390199
5.8 Printer Printer records all cycle data on 2.25” (57 mm) wide single-ply
paper. See S
ECTION 8.2.1. REPLACE PRINTER PAPER ROLL, PAGE 8-2 for
paper changing procedure.
Figure 5-12. Thermal Printer
• Paper Feed – Located on the upper front of printer door, just left
of center. Press to feed out paper from the roll stored inside the
control. This control is accessible during all phases of operation,
including alarm conditions. Press and hold for continuous feed.
• Paper Cut– Located on the upper front of printer door, just right
of center. Press to cut paper to allow removal for record storage.
• Duplicate Print – Press Options button to access the duplicate
print function. Press duplicate print button to obtain a duplicate
printout of the previous cycle run.
Figure 5-13. Accessing Duplicate Print
Paper Cut
Paper Feed
Press Button To
Obtain Duplicate
Print