AMX Modero ViewPoint MVP-8400 - Refreshing the Panel Connections Log; Clearing the Panel Connections Log

Setup Pages
91
MVP Modero ViewPoint Touch Panels
Refreshing the Panel Connections Log
1.
Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools
menu.
2. Within the Tools menu, press the Panel Logs button.
3. Push the Refresh button.
Clearing the Panel Connections Log
1.
Press the Tools button in the Protected Setup Navigation Buttons section. This opens the Tools
menu.
2. Within the Tools menu, press the Panel Logs button.
3. Push the Clear button.
4. Confirm your selection.