Setup Pages
103
MVP Modero ViewPoint Touch Panels
Time & Date Setup
The options on the Time & Date Setup page (FIG. 80 and FIG. 81) allow you to set and adjust time and
date information on the NetLinx Master. If the time and/or date on the Master is modified, all connected
devices will be updated to reflect the new information.
FIG. 80 Time & Date Settings Page (MVP-7500)
FIG. 81 Time and Date Setup Page (MVP-8400)
MVP touch panels do not have an on-board clock; the only way to modify a panel’s
time without altering the Master is via NetLinx Code.
To Next Page
Loading...
Need help?
General
