REPLACING THE BULBS:
Replacing the light bulbs:
• This range hood uses halogen bulbs: 20W 12V type G4.
• Make sure the range hood is unplugged or turn OFF breaker.
• Place a flat-head screwdriver between light cover and housing to remove cover.
• Gently pull defective bulb straight out and discard.
• Wear a cotton glove or use a cloth to handle the replacement bulb.
(DO NOT handle with bare fingers as this may shorten the life of the bulb).
Push gently but securely into light socket.
NOTE: DO NOT push too hard as bulb “legs” may break off.
• Replace light cover.
• Turn ON breaker and range hood to test for operation.
To Next Page
Loading...
