Use and Characteristic
Inverter MIG welding machine, combines 2 functions in one – MMA and MIG .
The machine is suitable for many different materials’ welding, such as carbon steel,
stainless steel, copper, titanium, and so on. It has good static load and dynamic
characteristic, complete control function, other advantages going as below:
IGBT high frequency soft switch transform，high efficiency, compact and
portable
Advanced control system, significantly improve the welding performance,
to meet the welding process requirements to a great extent
MIG and MMA 2 in 1
Easy to arc starting, stable arc, high performance
Small spatter,stable current, high reliability, good weld-seam shaping
Safty Precaution
Generally Safety Precaution
Ensure to follow precautions specified in this manual, or else, an accident
may happen.
The design and construction of input power supply, selection of installation
site and use of high pressure gas shall be performed according to the
relevant standards and rules.
Irrelevant personnel are not allowed to enter the welding workplace. Only
the qualified personnel can install, overhaul, maintain and operate the
welding machine.
Qualified staff is needed for installation, maintenance and use.
Make sure the welding machine is not used for other purposes except
welding (such as charging, heating and pipeline unfreezing, etc).
If the ground is uneven, please avoid dumping welding machine.
Avoid electrical shock or burn
To Next Page
Loading...
