Andersen Compact Motor 46ST User Manual

PRODUCT MANUAL
Compact Motor
™
Below Deck
Electric Winch
46/50ST
FOR USE WITH:
Compact Motor™ Electric Winches
RA2046014100 RA2050014100
RA2046014200 RA2050014200
Compact Motor™ Conversion Kits
RA2046214100 RA2050214100
RA2046214200 RA2050214200
Winch Versions:
46ST (
≥
V.4.0) 50ST (
≥
V.1.0)
Your Winch Version No. ____________________________________
Your Motor Serial No. ________________________________________
710203 Rev.1

Andersen Compact Motor 46ST Specifications

General

Brand	Andersen
Model	Compact Motor 46ST
Category	Winches
Language	English

Summary

Safety Notices

Stay Alert When Operating

Be vigilant during winch operation to prevent damage or injury.

Operator Training Requirements

Ensure all operators understand proper use and potential hazards for safe operation.

Prevent Accidental Operation

Turn off power and remove handles when not in use to prevent unintended operation.

Maintenance Power Disconnection

Always disconnect power before performing maintenance to avoid injury.

Lifting Operations Safety

Follow specific safety guidelines for lifting operations involving the winch.

Before Installation

Step 1: Determine Winch Position

Step 2: Install Deck Plate

Step 3: Fit Motor Unit

Step 4: Fit Drain Tube

Step 5: Install Push Button

Electrical Installation Notes

Battery Compatibility

Details compatible battery types for Andersen Compact Motors.

Motor Operation Advice

Advice on operating the motor to prevent damage and ensure longevity.

Additional Installation Considerations

Further important advice for electrical installation and use.

Wiring Diagram

Motor Component Details

Step 6: Prepare Power Cables

Step 7: Install Circuit Breaker

Step 8: Connect Power and Push Button Cables

Step 9: Installation Checks

Step 10: Winch Assembly and Installation

Troubleshooting Guide

Automatic Cut-out and Reset

Explains motor stops automatically under specific conditions and resets.

Fault Detection with LEDs

Describes how circuit breaker LEDs help diagnose faults.

LED Status Codes and Diagnostics

Service and Maintenance Schedule

Periodic Lubrication

Recommends annual lubrication of the motor drive shaft lip seal.

Lip Seal Replacement Interval

Advises on replacing the motor drive shaft lip seal every 3-5 years.

Gearbox & Drive Shaft Service

Recommends inspection and service of the planetary gearbox and drive shaft every five years.

Winch Inspection & Service Plan

Suggests inspecting and servicing the winch every two years.

Contact and Warranty Information