30 Operation Guide – Grain bagger GB-series Anderson Group
2.2 Safety labels
The following table provides the meaning of the safety labels found on the bagger. Ensure the labels
remain clean and replace them immediately if they become erased or damaged. If you replace a
component on which there is a warning symbol, make sure the new component bears the same
warning symbol.
Label Part n
o
Meaning
404057-1 Carefully read this use and maintenance
manual before using the bagger.
404158-1 Before any repair or maintenance
operation, stop the engine, remove the
ignition key and consult the manual.
404170 Hydraulic circuit under pressure. Before
starting maintenance work on the
machine, carefully read section 5 of the
manual.
404190 Maximum rate of the tractor's power
takeoff. Do not excede the indicated
value.
To Next Page
Loading...
Need help?
General
