Anderson IFX720 User Manual

Round Bale Wrapper
IFX720
404646-6
Operator's Guide
2019

Anderson IFX720 Specifications

General

Brand	Anderson
Model	IFX720
Category	Farm Equipment
Language	English

Summary

Starting Guidelines

1 Introduction

1.1 Overview

1.2 Control Panel

Shows and describes the labels on the control panel of the wrapper.

1.3 Technical Specifications

Lists dimensions, weights, and general specifications of the wrapper.

2 Safety Precautions

2.1 Safety Labels

Shows and explains various warning labels found on the wrapper for safety.

3 Preparation and Start-Up

3.1 Before You Start

Lists checks required before starting the wrapping operation.

3.2 Choosing a Site

3.3 Starting the Engine

Provides step-by-step instructions for starting the wrapper's engine.

3.4 Moving the Wrapper

3.5 Installing the Plastic Film Rolls

Details on how to load and install the plastic film rolls onto the wrapper.

4 Wrapping the Bale Tube

4.1 Adjustments

Explains necessary adjustments for bale size, roller guide, etc.

4.2 Levelling the Wrapper

4.3 Placing the Compression Bales

4.4 Putting the First Wrapped Bale in a Bag

4.5 Wrapping the Bale Tube

Details the automatic process for wrapping bales with plastic film.

4.8 Ending the Bale Tube

5 Common Adjustments

5.1 Bale Size (Bale Guides)

5.2 Roller Guide

5.3 Adjusting the Pusher Return (End of Pushing)

5.4 Hoop Starting Point

5.6 Bale Tube Compression

5.7 Number of Plastic Layers

6 Maintenance and Advanced Adjustments

6.1 Maintenance and Adjustment Schedule

Recommended schedule for maintenance and adjustments.

6.2 Lubrication

6.3 Greasing Points

6.5 Changing the Hydraulic Oil

Procedure for changing the hydraulic oil and its specifications.

6.6 Replacing the Hydraulic Oil Filter

Steps for replacing the hydraulic oil filter.

6.9 Advanced Adjustments

7 Storage

8 Troubleshooting