Anderson Group Round Bale Wrapper IFX720 – Operator's Guide 3
Table of contents
How to reach us 4
Starting guidelines 4
Anderson limited warranty 4
About this manual 6
1 Introduction 7
1.1 Overview 7
1.2 Control panel 8
1.3 Technical specifications 9
1.4 Tips and recommendations for high-quality sil-
age 9
2 Safety precautions 11
2.1 Safety Labels 12
3 Preparation and start-up 14
3.1 Before you start 14
3.2 Choosing a site 14
3.3 Starting the engine 14
3.4 Moving the wrapper 14
3.5 Installing the plastic film rolls 17
4 Wrapping the bale tube 20
4.1 Adjustments 20
4.2 Levelling the wrapper 20
4.3 Placing the compression bales 20
4.4 Putting the first wrapped bale in a bag 20
4.5 Wrapping the bale tube 21
4.6 Wrapping a bale with only one roll of plastic film 22
4.7 Changing the direction of the bale tube 22
4.8 Ending the bale tube 23
5 Common adjustments 25
5.1 Bale size (bale guides) 25
5.2 Roller guide 25
5.3 Adjusting the pusher return (end of pushing) 26
5.4 Hoop starting point 26
5.5 Push rod height 27
5.6 Bale tube compression 27
5.7 Number of plastic layers 27
6 Maintenance and advanced adjustments 28
6.1 Maintenance and Adjustment Schedule 28
6.2 Lubrication 28
6.3 Greasing points 30
6.4 Cleaning 31
6.5 Changing the hydraulic oil 31
6.6 Replacing the hydraulic oil filter 31
6.7 Checking the wheels and tires 31
6.8 Checking the stretchers 31
6.9 Advanced adjustments 31
7 Storage 37
8 Troubleshooting 38
9 Options 41
9.1 Work lights 41
9.2 Anderson plastic watch 41
9.3 25-litre fuel tank 41
9.4 Remote engine ignition 42
9.5 Remote steering 43