Anderson Group Grain bagger GB-series – Operation Guide 73
7 Optional equipment
7.1 Hopper side wideners
The hopper side wideners are attached in the upper part of the hopper to widen its opening from 8ft
(2.4 m) to 10ft (3 m). They allow the operator to use a front loader to pour the grain into the hopper.
The side wideners are bolted under the hopper.
A collision between the front loader trough
and the head of the loading screw could
damage the motor or the hydraulic hoses and
cause the spilling of oil into the grains. Be
careful when unloading the front loader
trough.
Figure 52 – Hopper side wideners
In order to install the hopper side wideners, proceed as follows: