Andonstar 249S - Save Files to Micro SD Card

10
Digital zoom
Press “up” button on the monitor (pic 2 #③) to apply digital zoom in, and “down” to zoom out ( pic
2#④)
Save files to micro SD card
To save images and videos to a memory card, please insert a card into the TF slot at the back of the
monitor before power on the device.
Attention:
1. TD card are not included in the standard package. Please purchase it from quality suppliers. We
recommend 10 grade high speed TF card.
2. Metal strip side of the card faces outward.
3. Push the card deeply into the card slot until you hear a click sound. Otherwise it would bounce back.
4. When the monitor shows “card error” or “card is full”, please format the card first before
take pics. Format steps are: Press and hold button M until it shows a menu→press M button again
to get into Setting menu→Press up or down button to select→choose”Format” and confirm
5. Do not insert a card while microscope is working. If you do, the microscope would switch off
automatically. And you will have to turn it on again.
In order to take videos, pictures, or playback files we have taken, we need to get into different modes
firstly. MODE button（pic 4 #②，marked as“M”）can be used to selected among three modes, video( ),
photo( ) and playback( ).
Record videos
In video mode( ) and photo mode( ) press “OK” button to start recording. Press it again to stop.
It works the same way with the “OK” button on the remote.
In video mode, on the right upper corner of the monitor shows time and “1080FHD”(white font).
Time here shows how long a video the memory card is capable to record, and “1080FHD” shows the
current video resolution.
Take photos
In video mode( ), photo mode( ) and while the microscope is recording, press “Capture”
button( ) to take photos
The button marked as a camera on (pic 2 #⑥) works the same way.
* In playback mode the microscope can not take photos or videos