e MAXXo is a range of fully condensing, fully
modulating stainless steel water heaters. Its unique
design offers up to four fully modulating burners.
is offers built-in redundancy for outputs of 60kW
and above, to ensure an uninterrupted, virtually instant
supply of up to 1920 litres per hour of hot water.
It’s available in outputs of 30kW, 60kW, 90kW and 120kW,
and multiple heaters can be installed where even greater
volumes of hot water are required. Each output is available
with tank capacities of 200 or 300 litres.
Features Benets
Up to four modulating burners
Recovery rates of up to 1920 litres of hot water per hour
98% gross efciency
Fully automatic electronic control with Building Management
System (BMS) interface as standard
Built-in high temperature anti-legionella program
WRAS approved and Energy Technology Listed
e optimum amount of gas is used to maximise energy efciency,
cost savings and built-in redundancy for outputs of 60kW and above
Ensures continuous supply of hot water and can satisfy the
most demanding hot water applications
Energy efcient, cost effective operation
Easy integration into the Building Management System
Safety and protection against legionella
Complies with the Water Supply (Water Fittings) Regulations and
Scottish Byelaws and qualies for the Government Enhanced Capital
Allowance scheme
OUTPUT RECOVERY RATE NOx EMISSIONS [0%O
2
]GROSS EFFICIENCY
31-124kW 98%
Up to
1920 l\hr
at
50°C rise
44mg/kWh
All the technical information you need is easy to nd
on our website, using your smart phone, tablet or PC:
-BIM les
-CAD les
-Brochures
-Technical specication sheets
-Case studies
-Installation manuals
-User guides
-Size-It Tool
Registered ofce address: Baxi Heating UK, Coventry Road, Warwick CV34 4LL
Andrews. Built to perform.
Sales
0345 070 1055
Technical
0345 070 1057
Website
andrewswaterheaters.co.uk
Twitter
@AndrewsWH
ICOM
Energy Association
RS 33961
To Previous Page
Loading...
