1
2
In order to avoid accidents, a possible violation of applicable law, do not use
other function as purposes expect navigation when driving.
In some areas, it is illegal for the drivers or other people in car to watch the
images of the display.
Notice for safety items
In order to avoid any injury or property damage of the user or other
persons, please be sure to read in details and abide the following notice item.
1) Read the Manual
2) Take good care of the Manual for future use.
3) To comply with all the warning and notice of this manual.
4) To comply with all operating instructions.
5) Regarding the power supply, please refer what the manual stated.
6) The installation and wiring distribution of this product needs specialized skills
and experience. To ensure safety, commissioned by professional technicians for
installation and wiring.
7) There is not any parts attached with the products for user to repair and
replace, please ask the professional technician with qualification of
maintenance to repair and replace.
8) Ventilation: Do not plug any ventilation cooling vents, the local shell holes
and other openings are for ventilation of heat. In order to ensure machine works
stable and reliable, long service life, not to plug the hole cooling, ventilation
environment must be maintained to avoid overheating the machine caused by
smoking, fire or other danger.
Warning
9) Avoid heat source: heat source should be avoided and products will be not
installed on local exposure to direct sunlight, high temperature areas; to be
away from heat sources, such as heating, heaters, heat or have other things
(including magnifier).
10) Avoid Water or Moist: device should avoid water or moist, do not let this
machine being exposed to rain or moisture in the environment (as when rain
and car washing) to avoid the internal machinery of the short circuit caused the
fire, electric shock or other danger.
11) Cleaning: before cleaning machines have to shut down power, and then
wipe panel Do not use volatile chemicals (such as gasoline or thinner) to clean
panel.
12) Avoid the matter or water into the device. to prevent foreign matter or liquid
into the inside of the machine, do not insert the foreign body from the cooling
hole or other opening into the machine. If you insert foreign bodies may cause
electric shock, machine parts within a short circuit caused the fire, such as the
risk of electric shock.
13) Installation device. do not install the unit to the truck, frame, tripod, bracket
or table without the manufacturer's recommendations, should be installed on
the install fittings which come with machines. When used in the car, pay more
attention to firm the installation of this machine, avoid the machine falling down
because of the sudden brake and resulting in personal injury.
14) Don't operate the machine in the event of rain or lightning for a long time,
have to cut off the machine power.
15) Appear in the following situations, please turn off the local power supply in
time, and contact with professional technician.
A. When the power wire or connector damaged.
B. When the machines were splashed with liquid or when the entry of foreign
matter;
C.when the machine has been rained or moisture attack;
Before the Operation Before the Operation
To Next Page