26
7.4 When all above fall, try to print multiple parts at once
If you have already tried the 3 items above and you are still having trouble
achieving sufficient cooling, there’s one more thing you can try. You can create a
copy of the part you are trying to print in Cura by selecting model, (Select the
model > Right clicking > Multiply object) or import a second object that can be
printed at the same time. By printing two objects at once, you can provide more
cooling time for each individual part. The hot nozzle will need to move to a
different location on the build platform to print the second part, which provides a
short relief for your first part to cool down. This is a simple, yet very effective
strategy for fixing overheating problems.
To Next Page
Loading...
