63
20.5 Mechanical issues of extruder
If you have verified everything above and are still having problems with
inconsistent extrusion, then you may want to check for mechanical issues with
your extruder. For example, many extruders use a drive gear with sharp teeth
that bite into the filament. This allows the extruder to move the filament back and
forth easily. These extruders also typically include an adjustment that changes
how hard the drive gear is pressed into the filament. If this setting is too loose,
the drive gear teeth won’t cut far enough into the filament, which impacts the
extruder’s ability to accurately control the position of the filament.
Consult Anet to see if your printer has a similar adjustment.
To Previous Page
Loading...
