Common Product Information
Document No. 992012. Issue 16 – 12.01.21
Page 24
repaired during the warranty period by any persons other than Anetic Aid or its
appointed agent. No other expressed or implied warranty is given.
Extended warranty; the warranty may be extended from the date of purchase, if the
product is maintained by Anetic Aid or its appointed distributor, commencing at the
end of the initial one year warranty period (quotations available upon request).
Extended warranty limitations; the extended warranty does not cover pressure care
mattresses or ancillary equipment (12 month warranty only applies).
For warranty, service and calibration, please contact Anetic Aid or their appointed
distributor.
40. Product Maintenance
The life expectancy of a QA3 Patient or Emergency trolley is 10 years from date of
introduction to clinical use, dependent on the level of care and maintenance. The
performance of this device may reduce once the life expectancy has been reached and
exceeded. It is recommended that the trolley is serviced on an annual basis in
accordance with the manufacturer’s service schedule.
Before use, ensure all trolley functions operate to their full range of movement and
that all components disengage, re-engage and lock correctly. Also visually inspect the
trolley for any loose or damaged parts, foreign bodies caught in the castors and
hydraulic fluid leakage.
If the trolley is damaged or faulty it must be taken out of use with immediate
effect and the fault reported to Anetic Aid, your authorised dealer or
maintenance department. The trolley must not be used until the damage or
fault has been repaired.
CAUTION: In line with the MHRA document, Managing Medical Devices,
maintenance work should only be conducted by suitably trained personnel
following manufacturer’s guidelines.
41. Label Identification
The following list is a description of all the labels used on the trolley;
Maximum patient weight limit is 320kg
(705.5lbs), and the trolley safe working
load is 320kg (705.5lbs).