Product Specifications
Document No. 992012. Issue 16 – 12.01.21
Page 6
Patient Weight Limit and Safe Working Load (SWL):
NOTE: Refer to Section 36, ‘Patient Weight Limit’, for more information about maximum
patient weight limit, safe working load and special precautions when handling heavy
patients.
NOTE: Fitting the Ø200mm castor option adds 2kg to the total trolley weight.
NOTE: This figure is a guide only, and will vary depending upon a number of conditions,
i.e.; patient weights, the number and severity of inclines, battery age, etc.
DRIVE Handle deactivation
Battery Type, Mains Charging Input, Charging Times:
100-240V~, 50-60Hz. T2.5A 250V 20mm
Full charge time from flat
30 minutes per 10% of the full charge
NOTE: The charging figures quoted are dependent upon the age and condition of the
battery, and are guidelines only.
Environmental Conditions:
Environmental Regulatory Information; WEEE, waste batteries, etc.:
For the latest information about Anetic Aid’s environmental policy, WEEE policy, and the
safe disposal of this product, please refer to our website.
NOTE: All dimensions quoted are subject to the following tolerances; angles ±5°, lengths and
widths ±25mm, depths ±10mm. Anetic Aid reserves the right to change specifications without
notice.
To Next Page
Loading...
