Angelo Po FX101G2 User Manual

Copyright by Servizio Clienti ANGELO PO Spa
102
7.9. Halogen lamp replacement
To replace the halogen lamp, follow the instruction below:
1. halogen lamp transformer primary 230 V ~ , secondary 12 V ~, halogen lamp
protection fuse on the power board 250 mA (picture 1);
2. to replace the lamp, unscrew the glass fixing nuts into the chamber (picture 2);
3. under the right hand panel it is possible to work on the lamp holder and the plug
(picture 3).
PICTURE 1
PICTURE 2
PICTURE 3

Angelo Po FX101G2 Specifications

General

Category	Oven
Temperature range	30°C - 300°C
Control	Electronic
Material	Stainless Steel
Capacity	10 x 1/1 GN
Power supply	400V/3N/50-60Hz