EN
14
Getting Started
1. Prepare the Remote
①
Slide to open the battery compartment.
②
Insert new batteries matching the polarity (+/-) and close the battery
compartment.
+
+
③
For first-time use, follow the on-screen instructions to pair the
remote with your projector.
T
The distance between the remote and the projector should
not exceed 10 m / 33 ft.
2. Position Your Projector
Place the projector on a stable, flat surface in front of the projection
surface. For the best results, the projection surface should be white and
flat.
To Next Page
Loading...
