EN
22
Speaker Delay: To synchronize the sound with the
image, adjust the sound delay by 10 milliseconds
for each operation.
Expert Settings: Customize advanced settings to
enhance audio quality.
• Digital Output: Select an output audio format.
• eARC: Allows TV to send audio backward to its
source device via a single HDMI cable.
• Auto Volume Control: Controls volume
automatically.
Bluetooth Speaker
Mode
Enable Bluetooth speaker mode.
Advanced Settings
Projector Mode: Select projector placement.
•
Auto: Automatically detects whether the
projector is inverted and automatically switches
to an appropriate projector mode.
•
Front: The device is located in front of the
projection surface.
•
Front Ceiling: The device is hanging from the
ceiling in an upside-down position. The image is
rotated by 180 degrees.
•
Rear: The device is located behind the projection
surface.
•
Rear Ceiling: The device is hanging from the
ceiling in an upside-down position behind the
projection surface. The image is rotated by 180
degrees and horizontally mirrored.
Motion Settings: Set a sensitivity level to trigger
autofocus and auto keystone correction.
Keystone Calibration: Recalibrate the projector if
keystone correction doesn't work properly.
To Next Page
Loading...
