EN 07
LED Status
Steady blue for one second Powered on
Light off Powered off
Flashing red slowly Low battery
•
To manually power on or off, hold the button on the receiver or
transmitter for 2 seconds.
•
The receiver and transmitters will automatically power off after 30
minutes if they are not being used and are not connected.
Pairing
The receiver and transmitters will pair with each other when powered on.
When disconnected, place the receiver and transmitters into the case and they will
pair automatically.
•
The LED indicator on the transmitter indicates the current status.
LED Status
Flashing blue rapidly Pairing
Steady blue Connected
Flashing blue slowly Disconnected
To Next Page
Loading...