anko EV-6803-S259 - Introduction to the Control Panel; Assembly Method

Page 8 of 28
4.1 Introduction to the Control Panel
Note: Refer to individual sections in this manual for detailed information.
5 Assembly Method
5.1 Attaching and removal of Battery Pack
Note: Charge the Vacuum Cleaner for at least 5 hours x 2 times before first
use.
Only use the Battery Charger which was supplied with this appliance.
Slide the battery pack onto the bottom of the vacuum cleaner handle and push
all the way in until it locks in place as shown:
Note: The Battery can only be fitted in one direction.
Battery Level in %
Increase Power
Manually Button
Battery Overheated
Indicator
Filter Blocked
Power Auto Mode
Decrease Power
Manually Button
Power Level
Indicator
Floor Head Brush
Jammed
Battery needs
Charging Indicator
Dust Pickup Level
Indicator Ring