Page 9 of 28
There should be no need to remove the battery pack once fitted, however, if
you should need to remove it, press the release button located on the top of
the battery pack, and at the same time, slide the battery straight out.
5.2 Attaching the Extension Tube
Insert the top end of the Extension Tube into the mating hole in the vacuum
cleaner body ensuring the locking tabs are aligned, then push inward until it
locks into place.
5.3 Removing the Extension Tube
To remove the Extension Tube, press the locking button to release then pull
the tube straight out.
To Next Page
