Chapter 2 SCPI Device Message Details
2-370
:CALCulate:ACPower:CARRier[1]:RCFRequency?
Adjacent Channel Power In Band Center Query
Function
This command queries the In Band center frequency for Adjacent
Channel Power measurement.
Refer to
[:SENSe]:ACPower:CARRier[1]:RCFRequency?.
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:CARRier[1]:RCFRequency?
[:SENSe]:ACPower:CARRier[1]:COUNt <integer>
Adjacent Channel Power Carrier Number
Function
This command sets the carrier number for Adjacent Channel Power
measurement.
Command
[:SENSe]:ACPower:CARRier[1]:COUNt <integer>
Parameter
<integer>
Carrier number
Range 1 to 12
Resolution 1
Suffix code None
Default 1
Details
This command is not available when ACP Reference is set to the
following:
•
Span Total
Example of Use
To set the carrier number to 12.
ACP:CARR:COUN 12
Related command
This command has the same function as the following command.
:CALCulate:ACPower:CARRier[1]:COUNt <integer>
To Next Page
Loading...
