ANSIMAG K+1518 - User Manual

Sundyne Corporation is ISO 9001-2000 compliant is certified by Lloyd’s Register Quality Assurance Limited.
INSTALLATION &
MAINTENANCE MANUAL
K+
ANSI
ISO
HORIZONTAL END-SUCTION PUMPS
ANSI MODELS: K+1516, K+326, K+326s, K+3156, K+436, K+1518 and
K+3158
ISO MODELS: K+i32160, K+i50160, K+i65160, K+i32200 and
K+i40200
JIS MODELS: K+j40160, K+j40200, K+j50200, K+j50160, and
K+j65160
Issued January, 2007
T.S.U.
♦♦♦♦Do not run dry ♦♦♦♦
This pump is NOT self-priming. The pump
must be filled with liquid before starting
otherwise severe damage may occur.
“Simple by Design”

Summary

Limited Warranty

Warranty Terms and Exclusions

EC Declaration of Conformity

Equipment Compliance Details

Safety Warning

EU Directives and Safety

Information on Machinery and ATEX Directives relevant to safety.

Safety Check List

Critical Safety Hazards

Covers magnetic field, forces, hot surfaces, rotating, and chemical hazards.

Principles of Magnetic Drive Pumps

Magnetic Coupling Operation

Pump Installation

Piping Installation Guidelines

Foundation Requirements

Guidance on creating a suitable foundation for the pump.

Pump Start Up and Shutdown

Start Up Procedures

Includes pre-start checks, operation, and shutdown steps.

Safety Information

ATEX Temperature Classification

Details temperature classification for ATEX directive compliance.

Disassembly and Maintenance

Basic Disassembly for Inspection

Procedure for initial disassembly to inspect pump components.

Inspection Check List

Detailed list of items to check during pump inspection.

Parts Replacement Procedures

Wet End Assembly

Component Assembly Steps

Instructions for assembling shaft, containment shell, and impeller.

Drive End Assembly (ANSI Pumps with NEMA Motors)

Mounting Outer Drive to Motor

Instructions for attaching the outer drive to the motor assembly.

Drive End Assembly (ANSI;ISO Pumps with IEC Motors)

Mounting Adapter, Outer Drive, and Foot

Mounting Drive End to Wet End

Bearing Frame Disassembly & Maintenance

Disassembly Procedure

Inspection & Maintenance

Assembly of the Bearing Frame

Specifications

Pump Technical Specifications

ANSIMAG K+1518 Specifications

General

Brand	ANSIMAG
Model	K+1518
Category	Water Pump
Language	English