11
P/N 1011458 Rev D 01/22
System Power-up
1. Upon application of power, the sys-
tem will display the following splash
screen.
2. After the steamer is powered-up, it
begins operation with this screen.
This displays how many hours have
accrued since the last clean cycle was
completed. To see more about using
the clean cycle, see page 17.
3. After a few seconds the screen will
change to this display:
4. When Cook is selected, the following
screen is displayed.
5.
heating process begins.
6. Once the boiler reaches its operating
temperature, the steamer is ready for
operation
System Power-down
1. -
er button behind the display screen.
The following screen is displayed.
2. If No is selected, the following screen
is displayed. If the steamer must be
cleaned see the Maintenance section
of this manual for Clean Cycle instruc-
tions on page 18.
3. After the boiler has cooled down, the
following screen is displayed.
4. Once the boiler is drained, the system
displays a splash screen indicating it
has completed the selected operation.
To Next Page
Loading...