16
P/N 1011458 Rev D 01/22
Error Messages
If the steamer displays any error
messages,turnthesteamero
and restart it. If the error per-
sists, contact Antunes Technical
Serviceat1-877-392-7854(toll
free).
Error Description
Zero Cross
TC0 Open
Thermocouple Broken
or Disconnected
TC1 Open
Power Switch Circuit
Malfunction
Software Update via
OPTION Write
MENU Write
PID Write
24V Missing
24VDC Power Supply
Display
Missing
Touch Screen Display
Down
Boiler Not
Empty
Drain Timeout
Clean Drain
Timeout
Down
Timeout
Boiler Clean Cycle
Boiler Normal
WARNING
Before replacing any parts, or opening
any side or rear panel from the
steamer, disconnect the steamers from
the electrical power supply.
CAUTION
Use of any replacement part other
than those supplied by Antunes of their
authorized distributors can cause injury
to the operator and damage to the
equipment and will void all warranties.
Weekly Maintenance - Cleaning Cycle
Scaled
Clean
WARNING
buildup of scale and lime as seen in the examples below. Excess buildup of scale and
lime may cause damage to the unit and will void the warranty. Using hard water in
excess of 1 gpg may result in lime scale buildup that may damage the boiler. Pretreat
hard water with a water softener or an RO system. To determine the hardness of the
boiler feed water, a 7002105 Water Sample Kit can be ordered from Antunes.