Anviz C2 User Manual

100
[Old password]: Default password is empty.
If user has modified password, please input this password which is used to log
on system. If it’s wrong, system will prompt,
Click [OK] and input old password again.
[New Pwd]: the password user wants to set.
[Confirm Pwd]: Input new password again to confirm.
If confirm Pwd is different from new one, system will prompt:
Click [OK] button to input confirm password again.
After modifying completed, click [OK] button to save new password and it
prompts:
5.6.5 Database linking setting
Click the [Database linking setting]. The [Data Link Properties] window pops up:

Anviz C2 Specifications

General

Identification Mode	Fingerprint, Password
Communication	TCP/IP, USB
Operating Temperature	0°C~45°C
Power	DC 12V
Operating Humidity	20%