Anviz C2 User Manual

70
5 Data Communication
Double click the icon [ ] on the desktop to start the communication
software ，the main interface will show as following (default password is empty):
If the time attendance software’s login password is not empty, you should enter
the password firstly.
Enter the password and click the button [OK] to login.
If you enter the wrong password 3 times, the software will automatically close.
When you enter a wrong password, a message box pops up as follows:

Anviz C2 Specifications

General

Identification Mode	Fingerprint, Password
Communication	TCP/IP, USB
Operating Temperature	0°C~45°C
Power	DC 12V
Operating Humidity	20%