AT Commands 17 (88)
3.3.13 AT*BUB Unbond
AT*BUB=
Un-bonds a previously bonded device.
Syntax:
AT*BUB=<bd_addr>
Input Parameters:
Name
Type Description
bd_addr MACAddress MAC address of the Bluetooth device to un-bond. If address
FFFFFFFFFFFF is selected, all bonded devices will be removed.
Note: Deleting seperate BLE devices is not supported, to delete BLE
device bonds FFFFFFFFFFFF have to be used.
Example:
Input: AT*BUB=8C8B83EE2ACB
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7
To Next Page
Loading...
