Need help?Do you have a question about the AnyTone AT-398UV and is the answer not in the manual?
Explains settings and operations for amateur radio use.
Describes the VFO mode for frequency-based operation.
Describes modes and limitations for professional radio use.
Instructions and guidelines for charging the transceiver battery.
Step-by-step guide for attaching and detaching the battery pack.
Procedure for powering the transceiver on and off.
How to control the audio output volume.
How to switch between channel memory and frequency (VFO) modes.
Instructions on how to transmit audio signals.
How to receive incoming signals and audio.
Configuration steps for setting CTCSS/DCS encode parameters.
To Next Page
General
