AnyTone AT-5555 User Manual

AT-5555 RADIO USER’S MANUAL
TABLEOFCONTENTS
WARNIGN
RESET FUNCTION
FUNCTIONS & FEATURES
INSTALLATON
Where and how to Mount Your CB Radio
Antenna Installation
Power Connection
Basic Operation
Adjustment of SWR (Standing Wave Ratio)
HOW TO USE YOUR CB
LCD DISPLAY
FRONTPANEL
PEARPANEL
PRESS-TO-TALK MICROPHONE
FUNCTION MENU SETUP
OPERATING PROCEDURETORECEIVE
OPERATINGPROCEDURETOTRANSMIT
SPECIFICATION
WARNIGN
To use the radio, please connect the antenna to the location “B” on the back panel of the
equipment firstly and then set the SWR (Standing Wave Ratio) before transmitting. Failure
to do so may result in destruction of the power amplifier, which is not covered by the
guarantee.
Welcome to Use
Welcome to the world of new CB radios. The new AT-5555 Radio provides you with top

AnyTone AT-5555 Specifications

General

Modes	AM/FM/SSB/CW
Impedance	50 Ohms
Supply Voltage	13.8V DC
Weight	1.5 kg
Frequency Control	PLL Synthesizer
Frequency Range	28.000-29.700 MHz
Output Power	AM: 12W, FM: 30W, SSB: 30W (PEP)
Channels	Programmable
Voltage	13.8V DC
Frequency Stability	±5 ppm

Summary

WARNIGN

RESET FUNCTION

FUNCTIONS & FEATURES

INSTALLATON

Where and how to Mount Your CB Radio

Instructions for optimal placement and mounting of the CB radio unit.

Antenna Installation

Procedures for correctly connecting and positioning the radio's antenna.

Power Connection

Steps for safely connecting the radio to the vehicle's power supply.

Basic Operation

Adjustment of SWR (Standing Wave Ratio)

HOW TO USE YOUR CB RADIO

LCD DISPLAY

Explanation of icons and information displayed on the LCD screen.

FRONT PANEL

Detailed description of controls and buttons located on the front of the radio.

REAR PANEL

Explanation of connectors and ports found on the back of the radio.

PRESS-TO-TALK MICROPHONE

How to use the microphone for transmitting and receiving.

FUNCTION MENU SETUP

Guide to configuring advanced settings and options via the function menu.

OPERATING PROCEDURE TO RECEIVE

OPERATING PROCEDURE TO TRANSMIT

SPECIFICATIONS