AnyTone AT-D868UV User Manual

7
AT-D868UV Digital DMR and Analog UHF/VHF Two Way Radio
1.11 Installing / Removing the Antenna
1. Installing the Antenna: Screw the antenna into the connector on the
top of the transceiver by holding the antenna at its base and turning
it clockwise until secure.
2. Removing the Antenna: Turn the antenna counter-clockwise to
remove it.
1.12 Installing / Removing the Belt Clip
1. Installing the Belt Clip: Place the belt clip above the corresponding
holes on the back of the radio, and screw it into place clockwise with
the two supplied screws.
2. Removing the Belt Clip:Unscrew counter-clockwise to remove the
belt clip.

AnyTone AT-D868UV Specifications

General

Brand	AnyTone
Model	AT-D868UV
Category	Two-Way Radio
Language	English