14
Adjusting
Hotkeys
1 Source/Exit
2 USB Selection/Clear Vision Demo/<
3 Volume/>
4 Menu/Enter
5 Power
Menu/Enter
When there is no OSD, Press to display the OSD or conrm the selection. Press about 2 second to turn off the monitor.
Power
Press the Power button to turn on the monitor.
Volume/>
When the OSD menu is closed, press the “>” key to open the volume adjustment bar, and press the “<” or “>” key to
adjust the headphone output volume.
Source/Exit
When the OSD is closed, press Source/Exit button will be Source hot key function.
USB Selection/Clear Vision Demo/<
When the OSD menu is closed. Press the “<” key to open the USB selection menu, press the “<” or “>” key to switch the
input source “USB C” or “USB up” function.
To Next Page
Loading...
Need help?
General
