1.1.1
LOCK
RELEASE
1.Turn the TV over and set it upside down.
2.Align the TV to the slots on the stand.
3.Please note that the longer edge of the stand should be facing forward.
4.Pull the screw ring upwards,then turn the screw clockwise to secure.Wh
-en the stand is securely attached to the TV,pull down the screw ring to fla
-tten it with the base of the screw.
5.Check the underside of the stand to stand to ensure that the TV has been
firmly installed to the stand and that the screws do not loosen.
1.Turn the TV over and set it upside down.
2.Turn the screw countercolckwise to loosen it.
3.Detach the stand from the TV.
REMOVAL:
INSTALLATION:
INSTALLATION INSTRUCTIONS
English
1
To Next Page
Loading...
