AOIP OM 17 - C.4 Configuring the Unit; C.4.1 Principle

MEASUREMENT
22 / 55 NTA47262-000A6
OM 17
C.4 Configuring the Unit
PrincipleC.4.1
The unit's configurable parameters can be accessed by the user by pressing the key.
The display shows "SET".
The "arrow up" and "arrow down" cursor keys let you browse through the programming menu.
A specific function is chosen by pressing the "right arrow" or ENTER keys.
To exit the programming menu, press the PROG button once again.
Direct Access KeyC.4.2
After pressing the key, you can directly access the following functions:
Direct access
keys
Functions
ALARM
Display or change alarm
thresholds (sub-section
3.4.5).
Rx
Tx
CTS
Entering a NumberC.4.3
Numbers are entered using the cursor keys, digit by digit.
The blinking digit is the one currently being entered.
Once the last digit is entered, press the right arrow key to validate the number entered.
Using keys while entering a number
keys
Functions
Down arrow
To increment the selected digit
Up arrow
To decrement the selected digit
Right arrow
To move to the next digit
Left arrow
To return to the previous digit
ENTER
To validate the number entered
PROG
To cancel the number entered
When entering a negative number (for example, a negative temperature), the first digit corresponds to the
sign. The ARROW keys call it up and clear it.