AOR AR7000 - Stop time; Search direction

6.2 Time
The AR7000 is equipped with one main clock plus four sub-clocks. Push the [ENT]
key when the cursor is placed alongside the item “Clock Setup”. Items relating to the
MAIN clock are prefixed “M” and the SUB-clock are prefixed “S”.
{figure109} {figure 110}
6.2.1 Main clock adjustment
When setting the MAIN clock, it doesn’t matter which sub-clock number (“Clock No.”)
is displayed (1 to 4).
A Date
Place the cursor alongside “M. Date” then press [ENT]. Push the [←] [→] keys to
alternate the position between Year, Month and Date. Rotate the main dial to select
the correct Year, Month and Date followed by [ENT].
{figure 111} {figure 112} {figure 113}
B Hour
Place the cursor alongside “M.Time” then press [ENT]. Push the [←] [→] keys to
alternate the position between Hour, Minute and Second. Rotate the main dial to set
the correct time followed by [ENT].
{figure 114}
C Name
Place the cursor alongside “M.Name” then press [ENT]. The name editor screen will
be displayed (refer to section 7 of this manual for further information on the name
editor). You can write an appropriate name for the time zone using a maximum of
seven characters.
{figure 115}
6.2.2 Sub-clock adjustment
A Selection of sub-clock
In the time selection menu, rotate the main dial to select any appropriate sub-clock
by number (Clock No. 1 to 4).
{figure 116}