Aparici P080 - Page 8

Pxxx_ES_EN_FR_IT_PT_ver3.0_02/22
8
USER'S AND INSTALLATION MANUAL
APARICI – Pxxx
Dear buyer, we thank you for purchase of our product.
Prior to installation and first use of the electric water heater, please carefully read these
instructions.
This water heater has been manufactured in compliance with the relevant standards and tested
by the relevant authorities as indicated by the Safety Certificate and the Electromagnetic Compatibility
Certificate. The technical characteristics of the product are listed on the label affixed between the inlet
and outlet pipes. The installation must be carried out by qualified staff. All repairs and maintenance
work within the water heater, e.g. lime removal or inspection/replacement of the protective anticorrosion
anode, must be carried out by the authorised maintenance service provider.
INSTALLATION MANUAL
Technical Information:
MODEL
P050
P080
P100
CAPACITY
50
80
100
ELECTRICAL CHARACTERISTICS:
VOLTAGE (V)
230
230
230
FREQUENCY (Hz)
50/60
50/60
50/60
POWER (W)
2000
(1200W + 800W)
2000
(1200W + 800W)
2000
(1200W + 800W)
CLASS
I
I
I
PROTECTION
DEGREE
IPX4
IPX4
IPX4
REGULATION
THERMOSTAT
TEMPERATURE
(ºC)
75
75
75
KIND OF
REGULATION
THERMOSTAT
PTC SENSOR
PTC SENSOR
PTC SENSOR
KIND OF SAFETY
THERMOSTAT
BULB
BULB
BULB
EXTERNAL
TEMPERATURE
REGULATION
YES
YES
YES
KIND OF
HEATING
ELEMENT
YES -
ELECTRONIC
YES -
ELECTRONIC
YES -
ELECTRONIC
KIND OF
HEATING
ELEMENT
DRY HEATING
ELEMENT
DRY HEATING
ELEMENT
DRY
HEATING
ELEMENT
HYDRAULIC CHARACTERISTICS:
ENAMELLED
TANK
YES
YES
YES
MAGNESIUM
ANODE
YES
YES
YES
NOMINAL
PRESSURE
7.5 bar
7.5 bar
7.5 bar
SAFETY VALVE
PRESSURE
8.5 bar
8.5 bar
8.5 bar