EasyManua.ls Logo

APC 250 - Battery and Charger Specifications; Surge and Noise Suppression; Operating Environment Requirements

APC 250
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
9.4 Battery and charger UPS version (Vac): 100 120 220/230/240
Battery type: Spill proof, maintenance free sealed lead-calcium.
Typical battery life: 3 to 6 years.
Battery life dependent on number of discharges and ambient temperature.
Low battery signaling: Continuous visual and audible alarm 2 minutes
before shutdown.
Recharge time: 5 hours typical from total discharge. UPS may be used
immediately after discharge but will provide shorter backup time.
9.5 Surge and noise suppression
Surge energy rating (Joules, maximum): 160 320 320
One occurrence, 10/1000 µs waveform.
Surge current capability (maximum): 6500 Amp peak.
One occurrence, 8/20 µs waveform.
Surge response time: 0 ns (instantaneous) normal mode; less than 5 ns
common mode.
Surge voltage let-through: <0.7% <0.7% <4.0%
per ANSI C62.41 Cat. A 6 kV test.
Noise filter range: 100 kHz to 10 MHz
Normal and common mode EMI/RFI suppression.
9.6 Operating Environment
Operating temperature: 0 to +40°C (+32 to +104°F)
Storage temperature: –15 to +45°C (+5 to +113°F)
Operating & storage relative humidity: 0 to 95%, non-condensing
Operating elevation: 0 to 3,000 m (0 to 10,000 ft)
Storage elevation: 0 to 15,000 m (0 to 50,000 ft)
Electromagnetic immunity:
IEC 801-2, 801-3, 801-4, 801-5; severity levels III or IV.
Audible noise: <45 dBA at 1 m (3 ft)
9.0 Specifications

Related product manuals