APC 3000 - Monitoring Battery and System Health Status; Accessing UPS Diagnostic Information and IDs

32
5.0 Operation
5.2.4 UPS Status menu (continued)
This screen shows the frequency to which the UPSs
output is synchronized (accuracy is ±1% of the full scale
value of 63 Hz).
This screen shows the number of Battery Packs connected
in the system.
This screen shows the number of bad or worn Battery
Packs connected in the system. To identify the bad Battery
Packs, locate the packs having an illuminated Replace
Battery indicator.
5.2.5 UPS Diagnostics menu
The UPS Diagnostic menu allows the user to access information that may be useful
when troubleshooting the UPS.
This screen shows the UPSs identity name. The name set
by the factory can be changed to an 8 character alphanu-
meric name using optional UPS monitoring application
software.
This screen shows the UPSs serial number set by the
factory.
This screen shows the UPSs date of manufacture set by
the factory.
This screen shows the date of the last Battery Pack
replacement. It is set to the date of manufacture by the
factory, but can be updated when new Battery Packs are
installed using optional UPS monitoring application
software.
This screen shows the firmware instruction set revision for
the Electronic Units UPS control microprocessor.