PRODUCT OVERVIEW
RTP-3280 Thermal Receipt Printer 5
Rear View
No. Item Description
1
Drawer kick-out connector
Connects to cash drawers.
2
DIP switch compartment
Holds the DIP switch.
3
Power connector
Connects the power adapter.
4
Serial connector
Connects to the host system (POS) using the serial cable.
5
USB connector
Connects to the host system (POS) using the USB cable.
6
Other interface version
Beside the standard version ( USB + RS232, interface
board non- detachable), the RTP-3280 is available in
other 3 versions which interface board is detachable as
shown in the table .
The interface board is separately available.
NOTE: Please refer to RTP-3280 User’s Manual CH. 2 Getting Started for the complete instructions.
1 2 3 4 5
6
Version 1
USB+RS232
Interface board detachable
Version 2
Ethernet + USB
Interface board detachable
Version 3
Parallel (LPT)
Interface board detachable
To Next Page
Loading...